| Technical parameter | Unit | Value |
| Sliding contact surface | – | Steel / Steel |
| Working temperature | °F | -58 / +302 |
| Type of lubrication | – | Grease / Oil |
| Size Range (inner dia.) | inch | 3/16 – 1 |
Misure teste a snodo FC (femmina)
| Dimensions (inch) | Ultimate Radial | ||||||||||
| Ball | Housing | Head | Length To | Thread | Thread | Ball | Static Load | Tilt | |||
| Product | Bore | Width | Width | Dia. | Ball Center | Length | Size | Dia. | Capacity | Angle | Mass |
| Number | d | B | C | D | h1 | L3 | UNF 3A | dm | (lb) | α° | (lb) |
| MC 3 | 0.190 | 0.312 | 0.250 | 0.625 | 1.250 | 1.250 | 10-32 | 0.437 | 1,169 | 13 | 0.028 |
| MC 4 | 0.250 | 0.375 | 0.281 | 0.750 | 1.562 | 1.562 | 1/4-28 | 0.500 | 2,158 | 16 | 0.043 |
| MC 5 | 0.313 | 0.437 | 0.344 | 0.875 | 1.875 | 1.875 | 5/16-24 | 0.625 | 2,784 | 14 | 0.072 |
| MC 6 | 0.375 | 0.500 | 0.406 | 0.000 | 1.938 | 1.938 | 3/8-24 | 0.719 | 3,915 | 12 | 0.112 |
| MC 7 | 0.438 | 0.562 | 0.437 | 1.125 | 2.215 | 2.215 | 7/16-24 | 0.812 | 4,218 | 14 | 0.160 |
| MC 8 | 0.500 | 0.625 | 0.500 | 1.312 | 2.438 | 2.438 | 1/2-20 | 0.937 | 6,660 | 12 | 0.249 |
| MC 10 | 0.625 | 0.750 | 0.562 | 1.500 | 2.625 | 2.625 | 5/8-18 | 1.125 | 7,364 | 16 | 0.382 |
| MC 12 | 0.750 | 0.875 | 0.687 | 1.750 | 2.875 | 2.875 | 3/4-16 | 1.312 | 11,518 | 14 | 0.602 |
| MC 14 | 0.875 | 0.875 | 0.765 | 2.000 | 3.375 | 3.375 | 7/8-14 | 1.375 | 18,476 | 7 | 0.906 |
| MC 14-1 | 0.875 | 0.875 | 0.687 | 2.000 | 3.375 | 3.375 | 7/8-14 | 1.312 | 22,843 | 12 | 0.906 |
| MC 16 | 1.000 | 1.375 | 1.000 | 2.750 | 4.125 | 4.125 | 1 1/4-12 | 1.875 | 43,541 | 17 | 2.406 |
| MC 16-1 | 1.000 | 1.375 | 1.000 | 2.750 | 4.125 | 4.125 | 1-14 | 1.875 | 43,541 | 17 | 2.127 |
| MC 16-2 | 1.000 | 1.375 | 1.000 | 2.750 | 4.125 | 4.125 | 1-12 | 1.875 | 43,541 | 17 | 2.127 |
Parlate con un esperto di cuscinetti per verificare che la parte sia adatta per l’applicazione prevista prima di effettuare un ordine.