| Technical parameter | Unit | Value |
| Sliding contact surface | – | Steel / Nylon |
| Working temperature | °C | -40 / +120 |
| Type of lubrication | – | High Performance Polymer |
| Bore Size Range | mm | 5 – 30 |
Misure teste a snodo COS-N (maschio)
| Dimensions (mm) | Ultimate Radial | |||||||||||||
| Ball | Housing | Head | Length To | Thread | Thread | Flange | Shank | Ball | Wrench | Static Load | Tilt | |||
| Product | Bore | Width | Width | Dia. | Ball Center | Length | Size | Dia. | Dia. | Dia. | Flat Across | Capacity | Angle | Mass |
| Number | d | B | C | D | h1 | L3 | 6H | d5 | d4 | dm | W | (kN) | α° | (g) |
| CHS 5 N | 5 | 8 | 6 | 18 | 27 | 10 | M5 | 11 | 9 | 11.1 | 9 | 3.3 | 13 | 14 |
| CHS 6 N | 6 | 9 | 6.75 | 20 | 30 | 12 | M6 | 13 | 10 | 12.7 | 11 | 4.3 | 13 | 20 |
| CHS 8 N | 8 | 12 | 9 | 24 | 36 | 16 | M8 | 16 | 12.5 | 15.9 | 14 | 7.1 | 14 | 33 |
| CHS 10 N | 10 | 14 | 10.5 | 28 | 43 | 20 | M10 | 19 | 15 | 19.1 | 17 | 10.0 | 13 | 55 |
| CHS 12 N | 12 | 16 | 12 | 32 | 50 | 22 | M12 | 22 | 17.5 | 22.2 | 19 | 13.3 | 13 | 60 |
| CHS 14 N | 14 | 19 | 13.5 | 36 | 57 | 25 | M14 | 26 | 20 | 25.4 | 22 | 17.1 | 16 | 124 |
| CHS 16 N | 16 | 21 | 15 | 42 | 64 | 28 | M16 | 28 | 22 | 28.6 | 22 | 21.4 | 15 | 189 |
| CHS 18 N | 18 | 23 | 16.5 | 46 | 71 | 32 | M18x1.5 | 31 | 25 | 31.8 | 27 | 26.2 | 15 | 255 |
| CHS 20 N | 20 | 25 | 18 | 50 | 77 | 33 | M20x1.5 | 35 | 27.5 | 34.9 | 30 | 31.4 | 14 | 325 |
| CHS 22 N | 22 | 28 | 20 | 54 | 84 | 37 | M22x1.5 | 38 | 30 | 38.1 | 32 | 38.1 | 15 | 433 |
| CHS 25 N | 25 | 31 | 22 | 60 | 94 | 42 | M24x2 | 42 | 33.5 | 42.9 | 36 | 47.1 | 15 | 580 |
| CHS 28 N | 28 | 35 | 24 | 66 | 103 | 51 | M27x2 | 46 | 37 | 47.6 | 41 | 57.2 | 15 | 714 |
| CHS 30 N | 30 | 37 | 25 | 70 | 110 | 51 | M30x2 | 50 | 40 | 50.8 | 41 | 63.5 | 17 | 963 |
Parlate con un esperto di cuscinetti per verificare che la parte sia adatta per l’applicazione prevista prima di effettuare un ordine.